STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

Load image into Gallery viewer, STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

STEPPERONLINE

STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

Regular price: €43,00
Sale price: €43,00
Regular price: ~~€70,00~~
Unit price: per

Save 39% (€27,00)

Tracked Shipping on All Orders
14 Days Returns

Description

3D printer motor with high torque
59Ncm(83.6oz.in) holding torque
NEMA 17 bipolar 1.65"x1.65"x1.89" 4-wire
Build with 39.37"( 1m) Cable and 0.1" pitch Connector
Rated current 2.0A & resistance 1.4ohms

Shipping and Returns

We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.

Customer Reviews

reasonable product Replacing stepper motors on 3D printer. originals were Automation Technology Inc. model KL17H248-15-4A and all comparisons will be to this model.Packaging is very good - well insulated and no damage.Product form factors match the ATI model. Except for: - the flat on the shaft only extends 15mm from the end of the shaft. the ATI flat extends 20mm. this may be a problem, depending on the location of the pulley you are trying to mount on the shaft.- the wiring of the new model is 24AWG, whereas the ATI is 22AWG.The connector for the wiring is the same Harwin 2.54mm 4-pin, so it fit fine on the RAMBo board connectors. The cable is 1.0m as advertised.I only have two hours of printing with these steppers, but they work as well as the ATI's. 4Not rated Torque Updated, so i contacted the seller and even though it was outside the 30 day amazon window they where still nice enough to issue me a refund. The motors did work they just wouldnt move the Axis on my printer not sure if it is the weight factor or what but i am trying to use them on a large format printer but still they even struggled with the X axis which isnt heavy. I can appreciate good customer service so i increased the star rating.So I spent some time thinking it was coding errors then weight design errors but then i finally gave up and order some E3D steppers and now everything is moving fine. Crappy part is i cant return these because its past the 3o days but i feel I should be able to return these since with steppers it takes time to figure out if they really work. 4Everything you need to get these working. Great quality packaging, good motors, wires did not correlate properly with documentation. You may have to use trial and error (don't reference the 1A, 1B, 2A, 2B wiring comment they gave in answer to another customer's question).I spent longer than I'd care to admit getting these working, here's everything you need:Elegoo Stepstick Stepper Motor Driver Module A4988 + Heat Sink for 3D Printer Reprap, CNC Machine or Robotics(Pack of 5) Good quality drivers which allow you to control easily. Best price I've seen for the A4988 driver- Elegoo is excellent for electronics.VCZHS 24V 2A AC to DC Switching Led Power Supply Transformer for LED Strip light, CCTV, Radio, Computer Project etc Higher Voltage = better working motor. This was the best power supply for these motors I could find.Lastly you're going to need a microcontroller (e.g. Arduino Uno) and a capacitor to protect kickback for your driver (if you're using a different driver with a built in capacitor this is not needed) with at least 47 microfarads (SODIAL(R) 10 x 47uF 50V 105C Radial Electrolytic Capacitor 6x11mm be warned: shipping is a bit slower than standard for this product).I recommend using Polulu's A4988 Stepper Motor Driver Carrier page for wiring (don't worry about adjusting the potentiometer until everything is working and you feel like optimizing performance). 4and I am both surprised and pleased at how well they run this rather large machine I've converted an old radial arm saw to a CNC router. I'm using three of these steppers, and I am both surprised and pleased at how well they run this rather large machine. Lots of torque. I'm running them with A4988 drivers at the full 2 amps, on a 19.5 volt power supply. They are turning T8 lead screws with 2 mm pitch. I could get more top speed by using a 24 volt power supply, but so far they work great ... have never stalled or lost steps cutting 3/4" MDF with 1/4" straight cut router bit. 5Plug and Play for Prusa i3 3D printer I needed a new motor for my Prusa 3D printer. It was skipping and erratic in Y axis movement. After isolating motor failure as culprit (by switching X/Y motor inputs on the raspberry pi motherboard of the printer and observing failure of Y motor with X commands but working X motor with Y commands), I decided that a cheap trial would be to order a new motor and hope that fixed the issue. Got it next day and simply unplugged the old Y motor lead and plugged in this new one via its attached clip. Worked well through the manual command movements (no adjustments to the 4 wires' position needed for me), so I fished the wiring through (wire length sufficient) and replaced the motor bolted on. test print was dead on, so I wrapped and zip-tied the wiring back in place. Slightly longer than the stock motor so I adjusted the Y-belt tensioner (at the front of the machine) to proper alignment. Many prints later, I am very happy with performance. All working as new. This is the great thing about open source hardware. 5I am now a fan. Not sure i believe the 84oz inch rating...doesnt seem that strong, but other than that, it worked great.Addendum: Just bought 3 more of these motors and I am now pretty impressed with the product. My main printer is getting a little "long in the tooth" and the X axis motor would get very hot and recently started slipping (missing steps) about 10 minuites into the print. I replaced it with one of these and it not only stayed relatively cool, it never missed a beat. My prints seem to be much beter which tells me that my old printer was slipping even when I didn't think it was. 5Perfect shipment packaging. I received a 0.59Nm(5.22lb.in) = 59Ncm(84oz.in) delivered in remarkable packaging. I have not used it yet, but I have no doubt it will operate perfectly. In fact I'm confident I could tape it back up and drop it from the 4th floor onto black top and it would perform just as well. 5Replaced my Prusa i3 MK3 extruder motor and it's perfect. The stock i3 mk3 extruder motor gets VERY hot. I don't know if it's poorly wired or just constantly overtaxed, but there's concern that the heat will travel down to the bondtech gears and deform the PLA as it's feeding. Since I was having some random issues, I decided I'd swap out my extruder for a slightly more powerful one, and this is the one I chose. It's a tad longer, but even with the newer R3 mods, that makes no difference in mounting it. It's a perfect replacement. It stays cool even for 12+ hour prints, and it hasn't given me a single issue. A perfect replacement. 5STRONG for Nema 17 See wiring instructions and other myths dispelled below VERY powerful for NEMA 17. The old Nema 17 I had was a toy so, I was prepared to redesign for a Nema 23, but that was totally unnecessary. This motor is legit and could likely drive all manner of 3D printers, CNC Routers, etc. I drove this at 36 volts and 1 amp and it remained warm, not hot.DISPELLING MYTHS:WIRE COLOR IS ALWAYS MEANINGLESS (other reviewers have probably learned this by now): To determine pairs, spin the shaft. Touch two wires together spin again - if it is more difficult to spin, that is a pair. The other two are the other pair - VERY simple. It is not uncommon for motor wiring color to be MEANINGLESS. Also, if you take you motor apart, you likely ruined your motor.HEAT IS OK: I see a lot of hysteria about heat. Essentially the motors can get very hot and it is ok. If you cannot leave your finger on it for more than a second without burns - then it is too hot.CHANGING SPIN DIRECTION: Flip ANY SINGLE pair. The motor will turn in the opposite direction. If you flip both pairs it is likely nothing will change. If you swap pairs, from A to B, direction will also change - but you only need to flip a single pair to effect a change in direction. 5best iv'e tried so far and brought a second lot i originally got nema 17 with 8mm thread built in but they had not enough tork and would slip alot, thought id give theses a try and instant improvement, abit longer than standard motors so check they will fit but are still the standard 40x40mm top and bottomUpdate. these are so good, i just brought 2 more, so much less heat caused by these motors, barely warm compared to the others, i even lowered the ampage and have more torqueif you need more torque, cooler motors and lower voltage to keep motor drivers cooler then these are definatly worth a try,will need 4 more for a delta build and these are the ones i will be using, so much better than the others 5

Categories

Headsets

Computers

Laptops

Mobile menu

STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

Description

Shipping and Returns

Customer Reviews

STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

Categories

Headsets

Computers

Laptops

Mobile menu

STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

Description

Shipping and Returns

Customer Reviews

STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC

Send a Message

Please adjust the following:

Request a Call back

Please adjust the following: