Headsets

Headsets

Computers

Computers

Laptops

Laptops

Customer service +44 1651 269999
info@directnine.eu

    PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    • Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    • Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    • Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    • Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    • Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    • Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    • Load image into Gallery viewer, PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights
    PHEVOS

    PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights

    4.2
    €48,00
    €48,00
    €78,00
    Sold out
    Save 38% (€30,00)
    You can't add more than 500 quantity.
    Order within 00 hours and 00 minutes
    to get between .. - ..
    Buying Bulk?
    • Tracked Shipping on All Orders
    • 14 Days Returns

    Description

    • Input:You can choose the input voltage (110V/240V) by switch.The input is 110/240volts AC and the output is DC 5V 12A
    • Protection: Shortage Protection, Overload Protection, Over-voltage Protection:115%-135%,Action output cut-off Reset:Auto Reset or fuse. ..
    • It is perfect for all 5V projects, such as WS2811 2801 WS2812B LED Strip Pixel Light, CCTV Camera, Security System, Computer Project, etc.
    • High effciency, long life and High reliability
    • GUARANTEE. 1 Year manufacturer 100% money back guarantee warranty!
    Read more

    Shipping and Returns

    • We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
    • Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
    • Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
    • All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
    • Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
    • In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.

    Customer Reviews

    Not worth the purchaseRight out of the box this power supply did not work. The power light did not illuminate and there was no output. Because of time I decided to open the power supply to see if I could see anything obvious. Well poor solder joints were obvious on the circuit board. Solder missing on some joints. So after correcting this brand new power supply it finally powered up. However, it still was insufficient for me. I thought buying a 12amp power supply for connecting to 4 half amp devices was overkill but 2 amps pulled the output voltage down to almost 4 volts. So I am not using this power supply and purchase a different one that actually works with no issues. Before you ask yes I adjusted the trim pot to get a little more output but still was only able to get 4.15 volts out1OK While it LastedI used the 5VDC power supply to provide switching power to a 5V relay connected to a Raspberry PI - very low current demand. It worked fine for almost 2 months, then it went out suddenly. Too bad it's past the return period. Looking for something else now.1Steady power, great priceI'm using the 5V40A product. Out of the box is was putting out 5.1v. I guess there's a potentiometer somewhere (based on other reviews), but I was happy with the default.I'm powering several single board computers, a powered usb hub, and an IoT device.I'm using it in a home office setting, and the only issue is that the fan is rather loud. Perhaps the 12A one is quieter? I didn't consider that in my rating as I imagine that's not a typical use case for this unit.Update: I replaced the fan with a quieter one and that does work. Though I'm sure it voids the warranty. So, fair warning. The fan is a 60mm x 60mm x 15mm (I didn't actually measure the 15mm, but I'm 99% sure on that) @ 12v with 2 pins. The fan I got was 25mm with 3 pins. I figured out which two pins are needed to run the fan and soldered on the original connector. It fits strictly speaking but it I had to bend the case a little to make it work, so if you go this route, don't get one 25mm thick.5arcade setupBought for RP3 arcade setup to power both the RP3 and the small screen that originally powered off the RP3. I was getting low voltage warnings since the RP3 was having a hard time and this was the solution. Everything works great, no problems after several weeks.5Working well after a month.This 5v 12A supply arrived in good shape with no damage and was set to 5.1v out of the box which is reasonable.It has worked well for the last month, but I ve only put about 5A of load on it. At that level of current, it runs cool so it is reasonably efficient. Internally it looks similar to other frame style supplies with old school through hole components. It is fused and the heat producing semiconductors make good contact using thermal compound. I ve purchased similar power supplies that come with no thermal paste and poor frame contact so this was good to see. There is an input filter, L1/CX1, which should keep any noise from back feeding into the power input.The adjustment resistor goes from about 4.9v to 6v. I would have liked to see a tighter range than a full volt, 4.8 - 5.3v would be better. Most people won t care, but I always worry that a bump to the potentiometer could cause it go too far out of spec. No doubt one could fix this if they want to go through the effort and have the expertise. I ve done it on other supplies and it usually requires changing one resistor and the potentiometer.I would recommend this for those that have the expertise to test/set the voltage, and can safely wire it to mains power.4Doesn't provide 12 volts DCI can't get the product to produce more than 10.8 volts. I've tried to adjust the rehostat, tried different power cords, and and different wiring options. I used a fluke multimeter to rest out put and no luck. I made sure the voltage switch was in the correct position. I'm dissatisfied with this unit.1Clean and coolSo far so good. Seems steady even with a 1.8A draw. Set it to 5.31 basically no load and it drops to 5.22 under load.5PHEVOS 5V 200watt - Review in progress - Possible used/refurbished unit sent instead of new.Product just arrived and this looks used. The box was unsealed and slightly dented which could have occurred during transit. However upon removing the supply from the box there are bent corners and obvious dirt/dust on the box. There is also bits of the protective plastic wrap sticking out from under screws and other pieces of metal. The inspected sticker seal is also broken. I've also just noticed a MISSING SCREW from the enclosure!I'm hopeful that the device is still fully functional despite its appearance, once I'm able to connect power and test will update my review accordingly.3Whiny noise.When I first powered it up the supply was making whining noises when not under load. Adding half an amp of load quieted it down.But after a couple of days of use it now whines noticeably under most loads.Sending it back.Update: Got a replacement unit made by Mean Well. Silent and more efficient!3This Fixed my raspberry pi 3 low voltage warning...The raspberry pi 3 supposedly needs a 5v 2.5 amp power supply. No matter what I plugged it into, it would give low voltage warnings. I even tried plugging it into my Tablet's 5.2v 3A plug and it still gave the error on occasion. When I used my usb tester on them, it was always under 5 volts so they wouldn't put out good current and voltage unless it was used on their own device.I got the 5v 60 watt power supply and set it to 5.1 volts and I'm getting no errors. I tested the output voltage as I was expecting and it was still outputting 5.1 volts. I do plan on powering a 3d printer board and a relay in addition to the raspberry pi 3 with this while it is a bit overkill, it will do the job well.5
    PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights

    PHEVOS 5V 12A 60Watt Universal Switching Power Supply for Raspberry PI Models CCTV Radio Project WS2812B WS2811 WS2801 LED Strips Pixel Lights

    4.2
    You can't add more than 500 quantity.
    €48,00
    €48,00
    €78,00
    Sold out
    Save 38% (€30,00)