Waveshare Raspberry Pi LCD Display Module 5inch 800480 TFT Resistive Touch Screen Panel HDMI Interface for Any Model of Rapsberry Pi4 A/A+/B/B+/2 B

Load image into Gallery viewer, Waveshare Raspberry Pi LCD Display Module 5inch 800480 TFT Resistive Touch Screen Panel HDMI Interface for Any Model of Rapsberry Pi4 A/A+/B/B+/2 B

Waveshare

Waveshare Raspberry Pi LCD Display Module 5inch 800480 TFT Resistive Touch Screen Panel HDMI Interface for Any Model of Rapsberry Pi4 A/A+/B/B+/2 B

Regular price: €102,00
Sale price: €102,00
Regular price: ~~€168,00~~
Unit price: per

Save 39% (€66,00)

Tracked Shipping on All Orders
14 Days Returns

Description

800480 high resolution, touch control;Back light control to lower power consumption
Directly-pluggable into any revision of Raspberry Pi (only except the first generation Pi model B which requires an HDMI cable)
Driver provided (works with custom Raspbian directly)
HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
High quality immersion gold surface plating

Shipping and Returns

We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.

Customer Reviews

Although it took me a while to figure it out ...Although it took me a while to figure it out, the pre-loaded image of Raspbian provided on the CD worked well. When I attempted to follow their provided instructions for installing an image other than the given one, I had trouble running the calibration. Their support did respond, but I could never get it to work. I did have to use an SD card larger than 8G because after installing additional software, I ran into a kernel error.Existing problem is that my Raspberry Pi 2 no longer works if I run: sudo apt-get updatesudo apt-get upgradeI followed the instructions on their wiki to use this command FIRST:sudo apt-mark hold raspberrypi-bootloader... but it didn't work. I had to re-format & re-load the image to my microSD card. But, as long as I'm content using the older (March 2015) version of the Raspbian image, it's working!4great looking screenI bought this screen for a Raspberry Pi Retropie setup I was working on. Be warned, even though it uses HDMI instead of GPIO for display, this is not a plug-and-play screen by any means, it takes a bit of configuration. That said, the configuration method in the comment posted by user "thomas" is what I used, and it worked well after restart. It can draw power straight from the Pi with GPIO, however if the Pi starts to use a large portion of the power (if the processor/gpu is working hard for whatever reason) the screen will be unable to draw enough power and will go white and stop working so well. So if you are running graphic-intensive software on the pi, you will want the screen plugged into separate power using the microUSB on the side. Overall though, great looking screen, great refresh rate, good size - perfect for those portable projects you may have.5It actually works for the RPI 2It works VERY WELL. Its only has 3 problems:1) The provided image is an old version of raspbian that does not have the user friendly gui wifi program. For whatever reason updating does not fix this and the screen is to big enough to see the bottom of the provided wifi program. In other words, you either have to use terminal to setup wifi, or setup from an official raspbian image. BE WARNED, the latter option requires the provided disk (which apparently some have not been getting and the posted download link is NOT what is on the disk AT ALL) because it has instructions, and requires a decent understanding of raspbian as the instructions are poorly written with incomplete commands.2) The 4 provided standoff screws were clearly an afterthought. It would be more useful in every way it they ALL lined up with holes on the RPI not ONE. It would also help if the threads on the end where long enough to mount to something. As they are now, all you can do is put a nut on the end of the one standoff that goes through the RPI. This is because all of the soldered connections on the RPI are taller than the standoff threads that stick through the mount-hole. It ensured that if you wanted to do the sensible thing and mount the whole assembly (RPI + Screen + standoffs) to a board/plate, you must have more standoffs to go underneath the the provided ones. The standoffs themselves are held on by screws set on top of the main board before the screen was attached. They tend to spin while having the standoffs screwed on. This is because they are held in place entirely by tape over the top (to see how useless this is, the next time you build something, instead of screwing in screws, just tape them on). This mount has the added "bonus" of ensuring that if you press or twist the standoffs slightly, you run the risk of destroying the screen in the same way as if you stabbed your TV with a screwdriver.3) The screen uses 26 pins of the RPI, and so next to the input provides a passthrough. HOWEVER, it is for a surface mount device (SMD) type connector, of which they do not provide. This ensures that it is semi-useless unless you can track down a 26 pin SMD connector.SIDENOTE: It comes with a DS stylusI have created the instructions to setup from blank Raspbian:First we must get the screen running, so with the power off install the screen onto the RPI. Then use ssh or other means to control it. (in my opinion ssh is best for this however)Type the following:sudo nano /boot/config.txtAdd/modify this text:# uncomment if hdmi display is not detected and composite is being outputhdmi_force_hotplug=1# uncomment to force a specific HDMI mode (here we are forcing 800x480!)hdmi_group=2hdmi_mode=1hdmi_mode=87hdmi_cvt 800 480 60 6 0 0 0start_file=start_x.elffixup_file=fixup_x.elfgpu_mem=128Reboot the systemDownload touch drivers from http://www.waveshare.com/wiki/5inch_HDMI_LCDUse a computer to extract all files from the downloaded tar.gz (do not extract the xinput-calibrator inside) and then load onto a USB flash drive. Plug USB drive into RPI and copy to wherever you want to put it, I used the home folder and the following instructions will show that.Type the following:cd /home/pi/LCD-showsudo ./LCD5-showThe system will then automatically reboot.Next we will install the calibrator.cd /home/pi/LCD-showsudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.debsu piDISPLAY=:0.0 xinput_calibratorUse a finger or the stylus and click the on-screen calibration.Everything should now work!4Works perfectly on my Retropie setup after following an instruction ...Works perfectly on my Retropie setup after following an instruction video on youtube. However, I wish this version of the screen has the same brightness options as the 3.5 inch.4It works like a charm with both my model B and model ...It works like a charm with both my model B and model 2B. Just follow the steps for setting up your SD card (format it and copy the image over with Win32DiskImager), plug everything in and enjoy. The Pi charger powers both the Pi and the screen when plugged into the Pi.One thing: They say this on the product page but I didn't really know what they meant until I plugged everything in. The HDMI port on the Model B is in a slightly different spot than it is with the other models, so the nifty HDMI adapter doesn't line up properly for that particular model. Everything still works, but you need an HDMI cord.5A nice adapter connects it to my Raspberry PI 2 B ...The display works very well. A CD is included with a Raspbian image along with a Windows program for writing it to an SD Card. Also on the CD are various PDF documents with helpful information. A nice adapter connects it to my Raspberry PI 2 B via the HDMI connector, while a standard .1" header socket connects to the pins on the Pi to provide the touchscreen connections and power. After connecting the screen, plugging the power into the display USB connector powers both the display and the PI, so you do not need to have two power cables. The touch screen is very responsive, and the display color and viewing angles are pretty good. They even threw in a stylus. I'm very pleased with this product and heartily recommend.5Faulty out of the boxFaulty out of the box - about 25% of the screen was garbled mush, 75% was fine. Discovered this too late to return the display. BUYER BEWARE!1... Raspberry Pi with my son and this was a great display for itI made a handheld video game using Raspberry Pi with my son and this was a great display for it. Adding the driver was not too hard. Just Google it, download and use a jump drive to transfer the files. I didn't use the one that came on the CD as I wasn't sure it was up-to-date. Can't be more happy. Thumbs up.5The screen is bad, and good at the same time.It s great, but ONE thing makes the product pretty... almost bad. And that is the screen. You know, the whole point of it. The quality is good, but it s very hard to look at unless you look at an very specific angle. If you move your head, or the device, it becomes impossible to tell what is happening on the screen. If that problem wasn t there, it would be almost perfect.3Add a keyboard remote and you've got somethingIt's good for a screen, it's okay for a touch screen, but it's awful for the soft keyboard. This works great with the aerb remote control though. http://www.amazon.com/gp/product/B00K768DHYAlso, here's a walk through of how I set mine up:https://www.youtube.com/watch?v=vjfixZFih444

Categories

Headsets

Computers

Laptops

Mobile menu

Waveshare Raspberry Pi LCD Display Module 5inch 800480 TFT Resistive Touch Screen Panel HDMI Interface for Any Model of Rapsberry Pi4 A/A+/B/B+/2 B

Description

Shipping and Returns

Customer Reviews

Waveshare Raspberry Pi LCD Display Module 5inch 800480 TFT Resistive Touch Screen Panel HDMI Interface for Any Model of Rapsberry Pi4 A/A+/B/B+/2 B

Categories

Headsets

Computers

Laptops

Mobile menu

Waveshare Raspberry Pi LCD Display Module 5inch 800480 TFT Resistive Touch Screen Panel HDMI Interface for Any Model of Rapsberry Pi4 A/A+/B/B+/2 B

Description

Shipping and Returns

Customer Reviews

Waveshare Raspberry Pi LCD Display Module 5inch 800480 TFT Resistive Touch Screen Panel HDMI Interface for Any Model of Rapsberry Pi4 A/A+/B/B+/2 B

Send a Message

Please adjust the following:

Request a Call back

Please adjust the following: