Headsets

Headsets

Computers

Computers

Laptops

Laptops

Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
  • Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
  • Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
  • Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
  • Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
  • Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
  • Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
  • Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
  • Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
  • Load image into Gallery viewer, Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)
Vendor
Litever

Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)

4.8
Regular price
€117,00
Sale price
€117,00
Regular price
€192,00
Sold out
Unit price
per 
Save 39% (€75,00)
Error You can't add more than 500 quantity.

  • Tracked Shipping on All Orders
  • 14 Days Returns

Description

  • ?Super Bright?? ---31W bright warm white cabinet lighting kit. No LED dots. No light glaring.
  • ?Easy to Install??---Sufficient self-adhesive pads, mounting clips, wire clips, extension cords will help you to install this under cabinet led lighting kit quickly and easily.
  • ?Dimmable ONLY by included LED dimmer??---Rotary switch dimmer included for 0%~100% stepless dimming. NOT compatible with existing Wall Dimmers.
  • ?Premium Quality?? ---Premium higher quality certified power supply included with US plug with 115CM cable. Licensed electricians can cut off the US plug and hardwire it to an ON/OFF switch.
  • ?Reliable & Long Lifespan??

Shipping and Returns

  • We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
  • Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
  • Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
  • All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
  • Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
  • In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.

Customer Reviews

AwesomeLove these lights. There was an over the sink light wired to a switch that I wired these too and then changed the switch to a motion detector switch Lutron Maestro Sensor switch (2-Pack), 2A, No Neutral Required, Single-Pole, MS-OPS2-WH, White (note: this switch "clicks" each time it is activated on or off, which isn't a big deal, but it isn't ideal). Had to buy the right angle drill attachment below to run the cable through the cabinet shelves. DEWALT DWARA100 Right Angle AttachmentAlso bought these just because of how my cabinets are all arranged.SIM&NAT LED Solderless Extension Power Cord 20AWG 10 Feet Male to Female 5.5mm x 2.1mm DC Extension Power Cable for 5050/3528 LED Strip String Light, CCTVLitever Power Splitter, 2 Way, 1 Female Jack to 2 Male Plugs, 5.5mm x 2.1mm, 1:2, Y Adaptor Copper Cable, for CCTV Camera & LED Strip Lighting Power Supply ConnectorLooking for a solution to make the lights fade up instead of just snap on.4All you need to get started on a clean under cabinet install.Excellent product. I searched all over reading reviews trying to find an ideal product for my situation. I have a cabinet over the microwave and stove, cabinet to the left, and three cabinets to the right. I wanted a clean install but wasn't sure how to run lights to either side of the microwave cabinet or if a splitter was needed. I plugged the power supply in above the microwave. Turns out the power supply cord is plenty long enough to be run inside the left cabinet and out the bottom where it connects to the dimmer switch and first light. I thought initially I would need a splitter installed off the power supply but turns out I did not. First light is hooked up to the dimmer switch then using two extension cables included plus an additional extension cable I ran them back up that left cabinet, over through the microwave cabinet, and then down the next cabinet and out to the next light, and so on for that side. All wires are concealed and its a clean install with the included clips. Drilled a pilot hole then a 1/2 inch hole to run cables through the cabinets. I attached the lights using the included brackets. It can be difficult working underneath the cabinet so I used a piece of tape to hold the bracket in the place, drilled through for a pilot hole, screwed into place, then removed the tape. Powers on and is controlled by the dimmer at the bottom of the left cabinet. Simply reach under at the edge and easily operate. Pictures attached. Warm white was chosen to match the light of the microwave and it all blends in seamlessly. Id advise you plug in the lights and lay out on the counter how you think it will install prior to drilling holes. You can then chose the best position for the lights to eliminate shadows and get good coverage. They are not installed in the middle of each as I first thought. And they look the best installed at the front edge. The kit might look complicated but it all goes together quite easily and logically.5Cutomer support is fantastic - best I have ever encountered.My project was under counter lighting in the kitchen. My wife wanted LED lighting with all the features including selection of color temperature. That would have cost over $600. After some searching and discussion, we decided we could buy both the 3000K and the 5000K Litever products to achieve color temp options, and the cost would be about a third of her original choice. I was initially impressed by the physical appearance of the product. The 12" light bars are made of durable aluminum, and the wiring is sturdy with molded connectors that are apparently a standard within the CCTV community. That means additional wiring options are generally available online, but probably won't be needed because extension cables are provided with the kit. The product has a very professional appearance. One thing I liked was that all the components could be plugged together to insure they worked correctly before installation. In less than a minute, I had the light bars connected and was testing the dimmer function. Everything worked as expected. Two things to note. One feature description said that you could either plug the power pack into an existing outlet, or if you wanted to direct wire it, you could cut of the plug from the power cord. This is not necessary since both types of power cords are provided; one that plugs into an outlet, and the other that has stripped wires for a direct connection. Another note is that there are molded plugs supplied with the kit, but no description of their function. After some thought, it became obvious to me that the plugs are terminating plugs. Since the light bars are plugged together end to end, and since they are all made with the same with a connection wire at both ends, the last light bar will have an exposed power connector. The molded plug is there to attach to the last molded connector so that the 12V power is not exposed to external events that might short the power supply. After reviewing my layout plans, I started working on the install. The light bars are held in place by plastic clips that screw into the bottom of the cabinet. All the other cable dressing components use adhesive backed pads to secure wires to the cabinet surface. I decided to mount the power packs to the underside of the cabinet as well, but did not trust the adhesive components to hold so I cut a half inch strip from some aluminum sheeting that I had, and made a band that wrapped around the power pack, and then secured it with 3/8 inch screws (note that the major hardware stores do not carry wood screws shorter than 1/2 inch - the only screws I could find were sheet metal screws, but they work just fine). I also used some standard wire ties, and some wire clamps that screwed into the wood where the bundles of wires seemed heavier than what I thought the adhesive would support. None of this may be needed in your install since a generous supply of clamps is included in the kit. Litever has done a super job of anticipating installation issues and providing needed components. The install was made difficult for me because my 60+ years have reduced my ability to bend over enough to view the underside of the cabinets, and my bifocals forced me to crane my neck to focus. More than once I was trying to find ways to lay on the kitchen cabinet so I could look directly up at the work area to make measurements for hole placement. Other than my physical issues, the install went fairly smoothly. I followed the advise of another individual and purchased a right angle drill attachment to allow drilling in tight spaces. As it turned out, I only needed it for one of the routing holes that I drilled. I was a bit disappointed that I had to drill 1/2 inch holes. This was due to the size of the connectors. In fact, I actually had to make my holes a bit larger since I had to route two cables through the same hole to support both the 3K and the 5K light systems. Once the install was completed, I was impressed with the result. We could select to use only the softer 3K lights, or only the daylight 5K lights, or set the intensities for a combination. I did have a couple of minor issues that concerned me, and this is the best news. I contacted Litever customer support to tell them that I seemed to get a bit of interference with my AM radio. They responded right away to let me know that this was not expected since the power packs go through FCC testing. They even told me that they went out to buy an AM/FM radio to see if they could reproduce the problem. They could not, but I was able to resolve my problem by relocating my radio an additional 6 feet away from the light components. This type of interference seems to be common with dimmable LED lights. My situation was not bad, but it was noticeable. Fortunately, either moving the radio or reorienting its antenna can resolve the problem. The best part of this story is that Litever customer service was exceptionally responsive. It is clear to me that they want you to enjoy their product, and they are willing to help you resolve whatever issue you encounter. I have had additional interactions with the company, and they have always responded quickly and with sincere concern to make you a happy Litever customer.5Simplest installation and the most beautiful lighting! I absolutely love this lighting. I installed it because I didn't want to wait for my husband to do it(and I'm not very handy) and It looks amazing. They give you the option to use all double sided sticky tabs to install everything or they also provide brackets and screws. I decided to use the brackets and screws as I noticed they do get warm after being on and I wasn't sure how that would work with the adhesive long term. The lights snap right into the brackets. They provide tons of extensions for them of which I only needed one to install over the gap of the microwave/range. They provide cord holders that are also installed with the sticky pads and they work great. You can't even tell that I installed them under the cabinets. The cords were extremely easy to conceal. They have a dimmable option to install with them... Just an extra cord you plug in. It also came with adhesive backing so it was easy to conceal under the cabinets. I decided to go a step further and I ordered a Bluetooth enabled wall outlet that was controlled by Alexa for voice enabled use. So now all I have to say is "Alexa, turn on/off the kitchen lights", and they turn on/off. These lights are easily the best bang for your buck. You cannot beat this price.. They look professionally done! I'm beyond satisfied!P.s... go with the warm white color... it looks more natural and less artificial. Adds warmth to the environment and less strain on the eyes.5Cheap and amazing kitchen upgradeSo far so good. These add light right where you need it most. Perfect night/morning lighting as well as work light mid day. Kit came with everything. Will have these in every kitchen I ever have from now onPics are1: under cabinet LEDs only, at full power2: under cabinet LEDs only, at lowest power3: under cabinet LEDs off, normal kitchen lighting on4: under cabinet LEDs at full power along with normal kitchen lighting on5Great lights long cable interconnect is a challengeI really like these lights. I've had them about a month. Most of the lights are installed. I bought the dimmer and connected the string to a wall switch it works great. But, there is a string on the other side of my sink I can not figure out how to connect them. I order the interconnect wire but it's a different connector size. Every few days I search looking for information about the connectors but that information is a bit confusing. Bottom line the lights are great, any long distance may be a challenge to connect.I did find an extension cable that works. https://www.amazon.com/gp/product/B01GPGNKXQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=13Defective Power Pack - GREAT CUSTOMER SERVICEGreat sleek design of the actual lights, and easy to install with basic handyman skills. Additionally, all of the needed (and then some) cords and installation materials were included. The problem is that I had these lights installed for 2 weeks and the power pack got so hot that it melted the outside plastic casing. Had I not checked the power pack inside my cabinet, who knows what would have happen. Clearly defective, but I am not able to return them now that I have permanently modified my cabinets for the cords.UPDATE 7/7/2018: Upon receipt of my comment above, LiteLife immediately sent me not one, but two additional power supply's for me to resolve the issue (no additional cost to me). Additionally, Litelife provided a full refund for the full purchase price of the Lighting Kit. Upon installation of the new power supply, everything works perfect again. GREAT CUSTOMER SERVICE!4Best under cabinet lighting kit period!I don't know if I've ever given a rave review before but this product deserves it. I've installed a couple different under cabinet lighting options in the houses I've owned over the years. I bought the 6 bar kit and it has far exceeded any implementation I've done in the past. The light bars that come with this kit have diffusers so your don't see multiple lights shining down. It looks like a solid bar of light rather than a bunch of LEDs. It comes with the power supply and additional extension cables. If you need more of either they are found on Amazon. The connections are made via a plug. No crimping, no splicing and no soldering. It comes with adhesive wire management clips to hold wires to cabinets. It comes with clips that can either be screwed to the cabinet or self adhesive to hold the light bars. I screwed them down. They used a single screw to hold so they do swivel enough if things don't line up exactly. It was definitely the neatest and easiest install I've done and would recommend then to anyone. Everything felt well thought out and was included in the kit. Everything was packaged very neat and secure. I couldn't find any kit that could touch this especially at the price point.I didn't use the inline dimmer since I was connections to a zwave outlet and I wanted full brightness all the time. The only additions I purchased separately for this kit was a zwave outlet (connected to Smartthings hub) and a splitter to split power two ways (left side and right side). Litever makes this addition to purchase separately. I purchased two Smartthings motion sensors to work with my hub to turn the lights on when motion was sensed on the countertops. I also purchased a Smartthings button that I used as a manual override to turn lights on and stay on instead of auto on and off using motion sensors. Most cabinets have a little trim or lip underneath which would hide the light bars and wiring. Mine currently doesn't but I still think they look great. I wouldn't do this with any other kit and would definitely purchase again. Hopefully they last a long time and I won't need to do that. When/if one bar needs to be replaced you just unplug, unclip from bracket and replace. It's that'll easy! If you've been wanting under cabinet lighting don't wait any longer.5Excellent qualilty. Easy installation. Fair price.Recently moved to a new house. Mfg wanted $1100 for undercounter lighting. This system works great for around $50. I can't imagine an easier installation. The quality of the components exceeded my expectations. The color temperature is what I wanted (5000K). I used the double stick tape to mount the lights. Excellent collection of accessories. Small adhesive backed lead holder to dress the leads. I didn't need to use the extension cords. Refrig is to the left in the photo. Plugged the PS into the AC outlet used to power the refrig and then drilled a hole in the cabinet to route the PS lead to the switch. Installation took 30 minutes. Very happy with this kit.5What They Don t Tell YouWhat they don t tell you is you are going to have to order a bunch of more parts if you want to install these. Unless you have a continuous row of cabinets, you need a separate converter and dimmer for each separate cabinet section. The kit comes with only one of each. I have 4 separate sections of cabinets meaning I had to order three extras to the tune of $45. What makes me mad is I would have ordered extras if this manufacturer had not concealed these facts to entrap me.1
Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)

Under Cabinet LED Lighting Kit Plug in,6 pcs 12 Inches Cabinet Light Strips, 2000 Lumen, Super Bright, for Kitchen Cabinets Counter, Closet, Shelf Lights, 31W, Warm White (6 Bars Kit)

4.8
Error You can't add more than 500 quantity.
Regular price
€117,00
Sale price
€117,00
Regular price
€192,00
Sold out
Unit price
per 
Save 39% (€75,00)